161
TERMINAL SERVERS
PORT PPP LCP MRU
{SET
}
{DEFINE
}PORT[PPP]LCP MRU "
number
"
{CHANGE
}
This option specifies the size in bytes of the maximum receive units (MRU)
that the Terminal Server wants to negotiate for the link. This command tells
the peer what the server wants to see as an upper limit to packet size. By
setting the MRU size you can tune the link performance. The default value
for this option is 1500 bytes and its range is 64 to 1500 bytes. The server
accepts packets of up to 1500 bytes regardless of the negotiated setting.
Restriction:
• The DEFINE and CHANGE commands require privileged status. The SET
command requires secure status.
PORT PPP LCP PASSIVE
{SET
}
{DEFINE
}PORT[PPP]LCP PASSIVE
{ENABLED }
{CHANGE
}
{DISABLED}
This option controls whether the LCP will actively open the LCP link on
connection, or will wait passively for packets from the peer to start the link.
The LCP waits for the peer to begin negotiations if LCP PASSIVE is
ENABLED. The LCP actively tries to start negotiations as soon as the PPP
session is started if LCP PASSIVE is DISABLED.
NOTE
The link will not be negotiated if both the Terminal Server and the
attached device use PASSIVE.
Restriction:
• The DEFINE and CHANGE commands require privileged status. The SET
command requires a secure status.
Summary of Contents for LE2101A-BT-R2
Page 2: ......
