manualshive.com logo in svg

Black Box LE2101A-BT-R2, Manual

The Black Box LE2101A-BT-R2 is a cutting-edge device that offers exceptional functionality. It comes with an easy-to-understand manual, allowing users to make the most of its features. You can conveniently download this user manual for free from our website, ensuring a seamless setup and operation experience of this remarkable product.

Share
Download
background image

230

TERMINAL SERVERS

Appendix A: Upgrading to New Software

The following steps will enable you to upgrade the software version on the
Terminal Server to the latest release, when necessary. It does not apply to the
Single-Port Terminal Server, which requires factory EPROM changes.

The following hardware is required in order to update the software

version successfully:

• IBM PC compatible with a 3.5” 1.44 MB disk drive

• At least 2.5 MB of hard-disk space free

• A terminal program supporting XON/XOFF emulation (such as

PCPLUS™, PROCOMM™, or Windows

®

Terminal)

You can get the new release via a 3.5” diskette containing a single file in a

self-extracting compressed format. The file name is saved in the form:
ver_id.exe where ver_id is the name of the new version release, for example,
CS2_3_0.exe for version 2.3.

Follow these steps to upgrade to the new version:

1. Copy this file to a suitable working directory on the hard drive.

2. Make sure that you are currently in the working directory and type the

name of the file and press <Enter>. This will expand the compressed file
and creates a new file name of the form: ver_id.hex

3. Stop all users from working on the Terminal Server.

Summary of Contents for LE2101A-BT-R2













































































































































































































































Reviews:

No comments

Related manuals for LE2101A-BT-R2

Canon ColorPASS-Z5000 Getting Started preview
ColorPASS-Z5000
Brand: Canon Pages: 130
Supero SUPERO SuperServer 6026TT-GIBQRF User Manual preview
SUPERO SuperServer 6026TT-GIBQRF
Brand: Supero Pages: 104
Supero SuperServer 6026TT-HIBQF User Manual preview
SuperServer 6026TT-HIBQF
Brand: Supero Pages: 112
IBM 7944E2U User Manual preview
7944E2U
Brand: IBM Pages: 21
Western Digital Ultrastar Serv60+8 User Manual preview
Ultrastar Serv60+8
Brand: Western Digital Pages: 406
King Pigeon D224 User Manual preview
D224
Brand: King Pigeon Pages: 19
NEC Storage ST1220 User Manual preview
Storage ST1220
Brand: NEC Pages: 69
Intel R1000BB Family Service Manual preview
R1000BB Family
Brand: Intel Pages: 69
Intel MFSYS25 - AXXPSU 1000W Power Supply Module User Manual preview
MFSYS25 - AXXPSU 1000W Power Supply Module
Brand: Intel Pages: 164
Intel MFSYS25V2 Service Manual preview
MFSYS25V2
Brand: Intel Pages: 226
TRENDnet TEW-P11G Datasheet preview
TEW-P11G
Brand: TRENDnet Pages: 3
ORing Industrial Networking Corp. IDS-181A Quick Installation Manual preview
IDS-181A
Brand: ORing Industrial Networking Corp. Pages: 2
Inspur i48M6 Installation Manual preview
i48M6
Brand: Inspur Pages: 2
3Com CS/3000 Installation Manual preview
CS/3000
Brand: 3Com Pages: 122
Plustek PlusServer Brochure & Specs preview
PlusServer
Brand: Plustek Pages: 2
Lantronix MSS100 Quick Start Manual preview
MSS100
Brand: Lantronix Pages: 8
Iomega StorCenter Pro NAS 150d Manual preview
StorCenter Pro NAS 150d
Brand: Iomega Pages: 70
FieldServer Fike Cheetah FS-8700-48 Driver Manual preview
Fike Cheetah FS-8700-48
Brand: FieldServer Pages: 36

Brands by name

Popular brands

Load more brands