biodex ATOMLAB 500, Operation And Service Manual, Page: 64 / 212

Figure 4.70. Select File to Import
3. Make sure a thumb drive containing data is plugged into one of the USB ports on the back
of the interface module.
4. Use the up and down arrows to scroll to the data to import. Touch the data name to
highlight and advance to the Okay To Proceed screen.
To Delete QA Data:
1. On the System Maintenance screen, touch <Data Management> and enter the passcode. The
Data Management screen is displayed.
2. Touch <Delete Multiple Tests>. Select the category, test type, and time frame to delete.
3. Touch <Delete>. The total number of tests that will be deleted is displayed.
4. Touch <Delete> again to delete the tests.
System Backup and Restore
To Backup The Atomlab 500 QA Data:
1. Insert a thumb drive into one of the USB ports on the back panel of the display.
2. At the System Backup/Restore screen, touch <Backup to USB>. A message will display
noting that the backup is in progress.
3. When a message showing that the backup has completed successfully is displayed, touch
4. <OK> to return to the System Backup/Restore screen. All data is now backed-up on the
thumb drive.