biodex ATOMLAB 500, Operation And Service Manual, Page: 21 / 212

Positioning
After selecting a suitable location for the Atomlab Dose Calibrator and becoming familiarized
with its components, position the various units. Make sure the detector and display units have
been positioned where they will not have to be moved prior to connecting the cables.
Environmental Operating Conditions
Temperature: 10 to 30°C
Humidity: 0 to 90% rh, non-condensing
For optimum performance, the Atomlab 500 Dose Calibrator should be operated in a normal
laboratory environment where the temperature and humidity are maintained for normal human
comfort and the ambient radiation level is low and constant.
Environmental Shipping and Stowage Conditions
Temperature: 0 to 40°C
Humidity: 0 to 90% rh, non-condensing
For optimum performance, the Atomlab 500 should be operated in a normal laboratory
environment where the temperature and humidity are maintained for normal human comfort
and the ambient radiation level is low and constant.
Power Requirements
Select a line power source with a socket that mates securely with the power plug provided.
Verify that the power line is properly grounded.
Do not select an outlet that has a wall switch control.
WARNING: Before inserting or removing connectors, turn power OFF.
AVERTISSEMENT: Avant le fait d'insérer ou le fait d'enlever des connecteurs,
éteignez le pouvoir.
This system uses an ICC Nexergy model ME60A1503-F02 (modified).
Line Voltage
100 to 240 VAC auto selectable by the power supply (1.5 to 0.75 amps).
Line Frequency
50/60 Hz.