biodex ATOMLAB 500, Operation And Service Manual, Page: 192 / 212

REQDATA {QAType} {Locationtype} {Date Range}
This command requests stored QA test results by filtering on the type and date range. It can be
used for backup or archival purposes.
The filtering parameters are:
1. QA Type:
•
All
•
CON Daily and Expanded Constancy
•
GEO Geometry
•
ACC Accuracy
•
DEC Decay
•
LIN Lineator
•
CAL Calicheck
•
HVA (Wipe) High Voltage Adjustment
•
CLB (Wipe) Daily Calibration
•
BCK (Wipe) Background
•
WIP Wipe Tests
•
CHI Chi-Square
2. Location Type: If the QA type is WIP, location type can be All or AREA (Restricted or
Unrestricted), SRC (Sealed Source) or PKG (Package).
3. Date Range: From-To for a date range or a date for a single day. A date is in the format of
mm/dd/yy or it can be mm/dd assuming the current year.
Examples:
1. REQDATA W IP AREA 05/01-05/31
Retrieve all of the Restricted/Unrestricted wipe results for the month of May.
2. REQDATA BCK 05/22
Retrieve all of the wipe background results from May 22
nd
.
3. REQDATA ALL
Retrieve all recorded data.
4. REQDATA ALL 03/21/2016
Retrieve all or the data from one day: 03/21/2016
Notes:
1. The first item returned will be a CR/LF.
2. n Records {count of records being sent}
3. Followed by the actual records in the current export format. If there are no records meeting
the criteria, the system would return a message:
0 Records
4. For the Wipe Test Data, a line will be added immediately after the location line for the
Location Type. Enter (
Location Type ) where ( Location Type ) can be Restricted, Unrestricted,
Sealed Source, or Package.
5. The Wide Window Background CPM value is currently being exported. It is located in the
Wide Window record. The following is an example of the Wide Window record with a brief
description of the fields: