Billion 810VGTX Router
Page | 43
WAN Profile
PPPoE Connection
PPPoE (PPP over Ethernet) provides access control in a manner which is similar to dial-up services using PPP.
Profile Port: Select the profile port as ADSL.
Protocol: The PPPoE protocol will be used.
Description: A given name for the connection.
VPI/VCI: Enter the information provided by your ISP.
ATM Class: The Quality of Service for ATM layer.
Username: Enter the username provided by your ISP. You can input up to 128 alpha-numeric characters (case
sensitive). This is the format of username “username@ispname” instead of “username”.
Password: Enter the password provided by your ISP. You can input up to 128 alpha-numeric characters (case
sensitive).
Service Name: This item is for identification purposes. If it is required, your ISP will provide you the information.
Maximum input is 15 alpha-numeric characters.
NAT: The NAT (Network Address Translation) feature allows multiple users to access the Internet through a single ISP
account, sharing a single IP address. If users on your LAN have public IP addresses and can access the Internet
directly, the NAT function can be disabled.
IP (0.0.0.0: Auto): Your WAN IP address. Leave this at 0.0.0.0 to obtain an IP address automatically from your ISP.
Auth. Protocol: Default is Auto. Your ISP should advise you on whether to use Chap or Pap.
Connection:
Always on: If you want the router to establish a PPPoE session when starting up and to automatically re-
establish the PPPoE session when disconnected by the ISP.
Connect on Demand: If you want to establish a PPPoE session only when there is a packet requesting access
to the Internet (i.e. when a program on your computer attempts to access the Internet).
