Billion 810VGTX Router
Page | 34
Ethernet Client Filter
The Ethernet Client Filter can support up to 16 Ethernet network computers. It enables you to accept traffic from
specific authorized computers or t o restrict unwanted computer(s) f r o m accessing your LAN.
There are no pre-defined Ethernet MAC address filter rules; you can add the filter rules to meet your requirements.
Ethernet Client Filter: Default setting is set to ‘Disable’.
Allowed: Check to enable a specific PC to access your LAN by inserting the MAC Address in the space
provided or click the Candidate button. Make sure your PC’s MAC is listed.
Blocked: Check to prevent an unwanted PC from accessing your LAN by inserting the MAC Address in the
space provided or click the Candidate button. Make sure your PC’s MAC is not listed.
The maximum number of clients is 16. The MAC addresses should be 6 bytes long and are represented only in
hexadecimal characters. Only numbers (0 - 9) and letters (a - f) are acceptable.
Note: Follow the MAC Address Format xx:xx:xx:xx:xx:xx. Colons ( : ) must be included.
Candidates: automatically detects devices that are connected to the router through the Ethernet.
Click the Candidate button to access the Active PC in LAN window.
Active PC in LAN: Active PC in LAN window displays a list of IP Address & MAC Addresses of Ethernet devices which
are currently connected to the router.
You can check the checkbox next to the IP address to block or to allow the PC from accessing the LAN. Then, click Add
to insert the IP to the Ethernet Client Filter table. The maximum number of supported Ethernet clients is 16.
