Billion 810VGTX Router
Page | 50
Connection:
Always On: A UMTS/GPRS call will be made when the router starts up. Enabling Always On will give you the option of
Keep Alive.
Keep Alive: Set Enable to allow the router to automatically reconnect the connection when the ISP disconnects it.
Connect to Demand: If you want to make a UMTS/GPRS call only when there is a packet re- questing access to the
Internet (i.e. when a program on your computer attempts to access the Internet). In this mode, you must set Idle Timeout
value. Enabling Connect on Demand will give you the option of Idle Timeout.
Idle Timeout: Auto-disconnect the connection when there is no activity on this call for a pre- determined period of time.
The default value is 10 seconds.
Obtain DNS Automatically: Select this check box to use DNS.
Primary DNS/ Secondary DNS: Enter the IP addresses of the DNS servers. The DNS servers are passed to the DHCP
clients along with the IP address and the subnet mask.
Note: If you don’t know how to set these values then please leave them unchanged.
