Home
/
Billion
/
810VGTX
/
User Manual

Billion 810VGTX, User Manual, Page: 110 / 130

Share

Page: 110 / 130

Billion 810VGTX User Manual Download Page 110

Billion 810VGTX Router

Page | 109

Outbound IP Throttling (LAN to WAN)

IP Throttling allows you to limit the speed of the IP traffic. The value entered in the Rate Limit blank will set the
speed limitation of the application.

Name: User defined description to identify the new policy/name created.

Time Schedule: Schedule your prioritization policy. Refer to Time Schedule for more information.

Protocol: The name of the supported protocol.

Rate Limit: To limit the speed of the outbound traffic.

Source IP Address Range: The source IP address or the range of packets to be monitored.

Source Port(s): The source port of the packets to be monitored.

Destination IP Address Range: The destination IP address or the range of packets to be monitored.

Destination Port(s): The destination port of the packets to be monitored.

Inbound IP Throttling (WAN to LAN)

IP Throttling allows you to limit the speed of the IP traffic. The value entered in the Rate Limit blank will set the
speed limitation of the application.

«
...
108
109
110
111
112
...
»

Summary of Contents for 810VGTX



































































































































Reviews:

No comments