Billion 810VGTX Router
Page | 17
Information from your ISP
Telkom ADSL connections use PPPoE, and automatically assign a WAN IP address to your router. The following
information is provided should you wish to connect to an alternative ISP.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE
VPI/VCI, VC / LLC-based multiplexing, Username, Password, Service Name,
and Domain Name System (DNS) IP address (this is automatically set by the
Telkom network but be set manually should this be required).
PPPoE
(Multisession)
VPI/VCI, VC / LLC-based multiplexing, Username, Password, Service Name,
Domain Name System (DNS) IP address and multiple-sessions on the same
PVC.
PPPoE
/
PPPoE
with Pass-through
VPI/VCI, VC / LLC-based multiplexing, Username, Password, Service Name,
and Domain Name System (DNS) IP address (this is automatically set by the
Telkom network but be set manually should this be required). In addition,
additional WAN address can be assigned using PPPoE dialler.
PPPoA
VPI/VCI, VC / LLC-based multiplexing, Username, Password and Domain
Name System (DNS) IP address (it can be automatically assigned by your
ISP when you connect or be set manually).
RFC 1483 Bridged
VPI/VCI, VC / LLC-based multiplexing to use Bridged Mode.
RFC 1483 Routed
VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask, Gateway
address, and Domain Name System (DNS) IP address (it is a fixed IP
address).
IPoA Routed
(IP over ATM)
VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask, Gateway
address, and Domain Name System (DNS) IP address (it is a fixed IP
address).
Configuring with your Web Browser
Open your web browser, enter the IP address of your router, which by default is 10.0.0.2, and click “Go”, a user
name and password window prompt will appear. The default username and password are “admin” and “admin”
respectively. (See Figure below)
Figure: User name & Password Prompt Window
Congratulations! You are now successfully logged onto your Router!
