Billion 810VGTX Router
Page | 8
Ethernet port #4 can be used as a console port. You need a special
console connector which is included in the package to connect with the
LAN.
The Rear Ports
LED
Meaning
1
Antenna
Connect the detachable antenna to this port.
2
DSL
Connect this port to the ADSL/telephone network with the RJ-11 cable
(telephone) provided.
3
Line
Connect this port to the telephone jack on the wall with RJ-11 cable.
4
Phone
1X – 2X
(RJ-11 connector)
Connect this port to an analogue phone set with RJ-11 cable.
5
USB
Connect the USB cable to this port.
6
Ethernet 1X — 4X
(RJ-45 connector)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the LAN
ports when connecting to a PC or an office/home network of 10Mbps
or 100Mbps.
Caution: Port 4 can either be LAN or Console port but not both at the same
time.
7
WPS
Push WPS button to trigger Wi-Fi Protected Setup function.
8
RESET
After the device is powered on, press it to reset the
device or restore to factory default settings.
1-3 seconds: reset the device
6 - 8 seconds: restore to factory default settings (this is useful when
you have forgotten the router’s administrative password).
Note: If the reset button is pressed for more than 10 seconds the device will
need to be power cycled before normal operation can be resumed.
