BERTHOLD TECHNOLOGIES NightOWL II LB 983, Operating Manual

Page: 58 / 136

LB 983 NightOWL II Operating Manual Quick Start
54
The scaling method can be changed via the context menu which can be in-
voked by clicking on the arrow next to the
icon.
The following options for the scaling are available:

Linear scaling

Logaritmic scaling (base 10)

Square root scaling

Logaritmic scaling (base e)
In addition different autoalignment preset features (Best fit 1 to Best fit 3)
are listed to adjust the min / max value based on the histogram.
At the bottom margin of the screen a transparency slider is available. This slider can be used to
define the transparency of the overlay. If the slider is in the 100% position, the overlay is com-
pletely opaque, whereas the overlay is fully invisible if the slider is set to the 0%.
Changes of the intensity scaling or the color threshold can be applied easily to all other meas-
urements within the current identity using the command. This simplyfies the post
run changes on measurements, as it is not necessary to modify every single image.
If the current changes should be applied to all identities measured within the same project, the
command can be used.