BERTHOLD TECHNOLOGIES NightOWL II LB 983, Operating Manual

Page: 27 / 136

LB 983 NightOWL II Operating Manual Quick Start
23
Depending on the hardware you use, a default selection of system filters might be
available and can be installed through the setup. If you want to install a set of empty
default filter slider and wheel tick the box
“Install default filters”
. The default filters
are empty filter sliders without any filters.
In this case the default systems filter management file will be copied to your computer.
If you reinstall the software the current active systems filter management file will be
overwritten.
Note: Due to the fact that the setup will install device drivers for the instrument hard-
ware on your computer, the Windows-system might show a warning that a signature of
a Windows driver cannot be verified. In this case allow the setup to install these Win-
dows drivers.
After the installation the controller will be initialized for the first time.
If the installation was performed using an instrument specific installation media (USB
Stick) the configuration procedure can be slightly different since the installer has al-
ready copied the instrument configuration to disk from the USB Stick during installa-
tion.
On Windows XP operated machines the following dialog may pop up.
In this case make sure to uncheck t
he box “Protect my computer…”. Otherwise the in-
stallation could fail due to insufficient access rights.