BERTHOLD TECHNOLOGIES NightOWL II LB 983, Operating Manual

Page: 36 / 136

LB 983 NightOWL II Operating Manual Quick Start
32
An illustration of the filter wheel is given below (filter wheel shown from above).
The positions of the filters are numbered and identified by a respective number printed on the
filter wheel.
For luminescence and photographic measurements one filter position (position 4)must be open.
Using emission filters the inprinted arrow on the filter should face the sample, turning away from
the camera.
To remove the filter wheel simply grab the center knob and pull out the wheel carefully. The
wheel is fixed by a magnet.
To reinstall simply slide the filter until the wheel snaps into the magnetic holder.
A initialization is required when the filter wheel has been replaced. To do this click on
to reinitialize the filter wheel.
Filters that have been placed in the filter wheel should be protected from above against falling
out by the snap rings which are included with the device.
4.1.14 Filter Management
indiGO supports an integrated filter management. The filter management is used to describe the
filter charging on the excitation filter sliders as well as the emission filter wheels.
2
3
1
Lum