Setup Program
53
2022-08 EN 5020079.40A.04
Adjusting the Thread Cut
> Tap «Setup Program».
> Tap «Embroidery Settings».
> Tap «Thread Cut Settings».
> To deactivate the automatic thread cut before changing a thread, tap the switch in the upper section of
the display (1).
> To activate the automatic thread cut before changing a thread, tap the switch in the upper section of the
display (1) again.
> To deactivate the manual thread cut after embroidering, tap the switch in the lower section of the display
(2).
– The machine won't stop for a manual thread cut.
> To activate the manual thread cut after embroidering, tap the switch in the lower section of the display
(2).
– The machine will stop after about 7 stitches.
> Cut the remaining thread with scissors.
1
2
Adjusting the Height of the Embroidery Presser Foot
> Tap «Setup Program».
> Tap «Embroidery Settings».
> Tap «Entering the Fabric Thickness».
> To set the distance between the embroidery foot and the stitch plate, turn the «Upper Multi-function
Knob» or «Lower Multi-function Knob», or tap «Plus» or «Minus».
