Setup Program
48
2022-08 EN 5020079.40A.04
> To activate automatic securing for decorative stitches and stitch pattern combinations, tap «Securing
Stitches».
> To program the number of securing stitches at short intervals, tap «Plus» or «Minus» in the lower section
of the display (2).
> To deactivate automatic securing for decorative stitches and stitch pattern combinations, tap «Securing
Stitches» again.
> To activate securing for the selected pattern at the end, tap «Pattern End».
– The machine secures and stops at the end of the pattern.
> To deactivate securing at the end of the pattern, tap «Pattern End» again.
Programming the Button «Thread Cutter»
The automatic securing can be programed before the thread cut takes place.
> Tap «Setup Program».
> Tap «Sewing Settings».
> Tap «Programming Buttons and Icons».
> Tap «Programming the Button Thread Cutter».
> To sew four securing stitches before cutting, tap «Securing Stitches».
> To program the number of securing stitches, tap «Minus» or «Plus».
> To deactivate automatic securing, tap «Securing Stitches» again.
Adjusting the Presser Foot Position with Needle Stop Down
With lowered needle, the presser foot is raised to hovering position when the needle is programmed in the
down position.
> Tap «Setup Program».
> Tap «Sewing Settings».
> Tap «Programming Buttons and Icons».
> Tap «Pressure Foot Position with Needle Stop Down».
> To activate the presser foot raised in the hovering position with needle stop downward, tap the switch.
> To deactivate the presser foot raised in the hovering position with needle stop downward, tap the switch
again.
