Errors and Faults
151
2022-08 EN 5020079.40A.04
18.2 Error Messages
Message on the Display
Cause
Solution
???
This stitch number does not exist.
> Check the entry and enter the new number.
! ! !
The stitch pattern cannot be
selected in the combi mode.
> Check the entry and enter the new number.
The stitch number cannot be
selected in combi mode.
> Select other stitches.
The embroidery module must be
removed.
> Hold the embroidery module, press the release button
and pull the module out.
The embroidery module must be
connected.
> Push the embroidery module carefully from left to right
into the embroidery module connection of the machine.
The selected needle and stitch
plate cannot be used in
combination.
> Check whether the correct needle and stitch plate are
attached.
> Exchange the needle and select it in the user interface.
> Exchange the stitch plate and select it in the user
interface.
The winding unit is activated.
> Deactivate the winding unit.
The thread indicator is
deactivated.
> To switch on both thread indicators, tap «Confirm».
> To keep the thread indicators switched off, tap
«Cancel».
