Embroidery preparation
114
2022-08 EN 5020079.40A.04
13.3 Needle and Stitch Plate
Inserting the Embroidery Needle
Embroidery needles of the type 130/705 H-SUK provide a larger eye and are slightly rounded. This avoids
thread abrasion when using Rayon- and cotton embroidery thread. Depending on the embroidery thread
use a size No. 70-SUK to No. 90-SUK needle.
> Raise the needle.
> Switch the machine off and disconnect it from the power supply system.
> Remove the presser foot.
> Loosen the needle clamp screw (1) using the screwdriver and remove the needle.
> Hold the needle with the flat side (2) to the back.
> Push the needle up to the stop (3).
> Tighten the needle clamp (1) screw using the screwdriver.
1
3
2
Attaching the Stitch Plate (CutWork/Straight)
The straight/cutwork stitch plate has a small hole in the needle area. The stitch formation (thread knotting of
upper and bobbin thread) is thus optimized. This results in a more beautiful stitch appearance.
> Switch the machine off and disconnect it from the power supply system.
> Remove the needle.
> Remove the presser foot.
> Lower the feed dog and remove the bobbin cover.
> Remove the screws of the stitch plate with the screwdriver.
