Errors and Faults
150
2022-08 EN 5020079.40A.04
Fault
Cause
Solution
Speed Too Low
Unfavorable room temperature.
> Place the machine in a warm room one hour before use.
Settings in the Setup Program.
> Adjust the sewing/embroidery speed in the Setup
Program.
> Adjust the slide.
The Machine doesn't Start
Unfavorable room temperature.
> Place the machine in a warm room one hour before use.
> Connect the machine and switch it on.
The machine is damaged.
> Contact the specialized bernette dealer.
The Light of the Button
«Start-/Stop» doesn't Light Up
Light is defect.
> Contact the specialized bernette dealer.
Neither the Sewing Light Nor
the Light on the Freearm
Lights Up
Settings in the Setup Program.
> Activate it in the Setup Program.
The sewing light is defect.
> Contact the specialized bernette dealer.
Upper Thread Indicator Fails
to Respond
Settings in the Setup Program.
> Activate it in the Setup Program.
The upper thread indicator is
defect.
> Contact the specialized bernette dealer.
Bobbin Thread Indicator
doesn't React
Settings in the Setup Program.
> Activate it in the Setup Program.
The bobbin thread indicator is
defect.
> Contact the specialized bernette dealer.
Error during Software Update
The update process is blocked
and the hourglass on the display
is inactive.
> Remove the USB stick.
> Switch off the machine.
> Rename the firmware file from «.fw» to «.auto».
> Insert the USB stick.
> Switch the machine on.
– The update starts automatically.
