Embroidery preparation
113
2022-08 EN 5020079.40A.04
> Attach the Embroidery Foot (JL) from the back with the index finger to the presser foot bar and tighten
the screw.
1
>
Important:
After starting the machine, select the embroidery foot in the «Presser Foot Sole Display».
Selecting the Embroidery Foot
To ensure that the machine can set the correct standard height for the attached embroidery foot, the
embroidery foot must be selected in the «Presser foot sole display».
> Switch the machine on.
> Tap «Presser Foot Indicator/Presser Foot Selection».
– Any presser foot soles are displayed.
> Select the attached embroidery foot.
– A description of the selected embroidery foot is displayed.
> Tap «Confirm».
– The selected embroidery foot is displayed and the standard height is set.
