Errors and Faults
155
2022-08 EN 5020079.40A.04
Message on the Display
Cause
Solution
This message appears when the
thread cutter is adjusted after
embroidery starts.
> Cut the thread manually.
This message is displayed after
switching sewing mode to the
embroidery mode.
> Do not lower the Dual feed.
500,000 stitches have been sewn
with the machine since the last
cleaning advice.
> Clean the machine.
> For reference to cleaning to be made again after
switching on the machine, tap «Cancel».
The machine has reached a stitch
count of 4,000,000 since the last
maintenance by a bernette
dealer.
> Contact your specialized bernette dealer to have the
machine maintained.
> For reference to maintenance to be made again after
switching on the machine, tap «Cancel».
The Embroidery Program has
been selected.
> Insert the high thread tension bobbin case.
The Sewing Program has been
selected.
> Insert the standard bobbin case.
