Errors and Faults
153
2022-08 EN 5020079.40A.04
Message on the Display
Cause
Solution
The buttonhole lever does not
touch the buttonhole foot with
slide (RJ).
> Pull the buttonhole lever down as far as possible until it
engages behind the bracket.
The buttonhole lever is not pulled
down.
The feed dog is lowered.
> Pull the buttonhole lever down as far as possible until it
engages behind the bracket.
> Raise the feed dog.
0 mm
0 mm
Wrong stitch plate is used.
> Remove the stitch plate and insert the correct one.
The needle moves sideways.
When the stitch plate is exchanged, this illustration appears
because the needle is likely to move.
The needle moves upwards.
> Check whether there are any external objects near the
stitch plate.
> To raise the needle, tap «Confirm».
The hoop is not attached.
> Attach the hoop.
The hoop is attached.
> Remove the embroidery hoop.
