My bernette
13
2022-08 EN 5020079.40A.04
Operating Components
Number
Operating
Component
Name
Purpose
1
Quick Reverse
> To sew backward, press the «Quick
Reverse» button.
> To sew backward permanently, keep the
«Quick Reverse» button pressed.
The «Quick Reverse» button does not work for
stitch patterns 22–24 and for buttonhole
patterns 51–71.
2
Thread Cutter
> To cut the upper thread and the lower
thread automatically, press the «Thread
Cutter» button.
2-6 securing stitches can be programmed in
the Setup-Program. They are sewn before the
thread is cut.
3
Presser Foot Up/
Down
> Press the «Presser Foot Up/Down» button
to raise the presser foot into a hovering
position.
> To raise the presser foot, press «Presser
Foot Up/Down».
4
Start/Stop
The button «Start/Stop» serves the purpose to
change the presser foot position and to start
the machine.
> To start the machine, keep the button
«Start/Stop» pressed for 2 seconds.
Sewing Mode
> Press the button «Presser Foot Up/Down»
to raise the presser foot into hovering
position.
Embroidery Mode
> Briefly press the «Start/Stop» button to
raise the presser foot into its highest
position in embroidery mode.
> Press the «Start/Stop» button again to raise
the presser foot into hovering position.
5
Speed Control
The sewing speed can be adjusted infinitely
variable with the slide.
> Move the slide to the left to reduce the
sewing speed.
> Move the slide to the right to increase the
sewing speed.
