Beijing Dahao Technology BECS-D56 Page 77 Owner'S Manual Download

Page: 77 / 188

Chapter 5 Management of Machine Parameters

、

Input factory password, move the cursor to corresponding item and press “

”to do the

following operation.

5.8.1

Set the parameter

The setting of these parameters is same as the other parameters. For the

description, please see Appendix

Ⅰ

Parameter Setting List.

5.8.2

To inquire servo driver status

This operation can inquire the Dahao servo driver status. Machine gives the

windows of X/Y servo driver status after user carries out the operation. User

should turn off power and adjust Dahao servo driver if the following screen

appears.

5.8.3

Fix driver parameters

The current setting of parameters for X

＆

Y servo driver in the machine will be

saved in the servo driver after user performs the operation. And the parameters

can be saved even power is off.

5.8.4

Restore default driver parameters

The X

＆

Y parameters of servo driver in the machine will be restored to their

default values if you operate this item.

BECS-D56 computerized embroidery machine owner’s manual

Summary of Contents for BECS-D56





























































































































































































Search results

Summary of Contents for BECS-D56

Reviews:

Related manuals for BECS-D56

Brands by name

Popular brands

Beijing Dahao Technology BECS-D56, Owner'S Manual

Search results

Summary of Contents for BECS-D56

Reviews:

Related manuals for BECS-D56

Brands by name

Popular brands