Beijing Dahao Technology BECS-D56 Page 82 Owner'S Manual Download

Page: 82 / 188

Chapter 6 Assistant Operation

6.1.6

Set B Point

This function is optional and the user has to book it advance.

This function is developed to solve the problem of threading when

thread-breakage appears on giant machine.

When thread breaks, user needs press the slow switch to let the machine trim.

Then the frame will move to the point B. After threading, user can pull bar to the

right side to let the frame back to the stop point. Then the embroidery can go on.

、

Setting Procedure

、

Set the absolute origin, see 6.2.3 for details.

、

Go into “Assistant Emb Operation” screen according to above description.

、

Move cursor to “Setting B Point Machine” and press “

”key.

、

Press the manual frame-moving key to move the frame to a proper position.

、

Press “

”to confirm saving B point.

、

Notes

、

When frame returns to the B point, there is only action on Y direction.

、

Frame will not move to the B point when thread breaks at some position, even you press

the slow motion switch.

If the B point is set as the image below and frame only moves above B (a zone indicates

the inner edge of the table), the machine will only have the trimming action instead of moving

frame to B point when user presses slow motion button after thread-breakage; only when frame

is moving under B (b zone indicates the outside of table), can the frame move to the B point

after user presses slow motion switch at thread-breakage. If no action at frame, please check the

machine.

76 BECS- D56 computerized embroidery machine owner’s manual

Summary of Contents for BECS-D56





























































































































































































Search results

Summary of Contents for BECS-D56

Reviews:

Related manuals for BECS-D56

Brands by name

Popular brands

Beijing Dahao Technology BECS-D56, Owner'S Manual

Search results

Summary of Contents for BECS-D56

Reviews:

Related manuals for BECS-D56

Brands by name

Popular brands