Chapter 11
Directions on Coiling, Taping and Zigzag Embroidery
Chapter 11
Directions on Coiling, Taping
and Zigzag Embroidery
11-1
Function Introductions
1.
Coiling function: This is a method to wind core thread in a form of coiling. Left Coiling
(clockwise) and Right Coiling
(counterclockwise) are both available in coiling
function, which is decided by the setting of parameters.
2.
Taping function: Tape can be used as embroidery material. It includes taping 1
and
taping 2
(blind embroidery)
3.
Zigzag function: this function is to sew the core thread in the specialized stitch form on the
fabric. There are six stitches form for Zigzag Sewing in computer: Z1, Z2, Z3, Z4, Z5 and
Z6. Their icons are as follows.
Z1 Z2 Z3 Z4 Z5 Z6
For convenience, Coiling, Taping and Zigzag-sewing are all called as special embroidery at
below.
4.
Flat embroidery head and special embroidery head can be switched automatically or
manually.
5.
Coiling, Taping and Zigzag functions can be switched at will.
6.
The presser of special embroidery can go up and down automatically or manually. (This
function is only for the machines installed with relevant apparatus)
7.
The highest speeds of flat embroidery head and special embroidery head can be set
respectively.
8.
Auto-saving of the M axis stop point at power-off
：
The machine can continue the work from
the stop point when the power recovers.
9.
The trimming function of the special embroidery head (no trim\trim the bottom thread\trim
both the upper and bottom threads)
10.
The presser of special embroidery can go up automatically before manual frame-moving and
go down before embroidery.
11.
Zigzag sewing lever can be tested manually.
11-2
Main Technical Specification
1.
The sequence of needle positions on flat embroidery head and special embroidery head: This
control system deems the first one as the special embroidery needle position, and the needle
position for flat/sequin embroidery are from second to end.
2.
Speed of special Embroidery: 300—600rpm, adjusting step at 10r/m.
3.
Manual rotating angle of M-axis: 18
°
/step.
BECS-D56 computerized embroidery machine owner’s manual
123
Summary of Contents for BECS-D56
Page 2: ......
