Chapter 5 Management of Machine Parameters
5.1.5
“Rep. Mode”
Currently, system supports common repetition and part repetition. Common repetition means:
after embroidering a design, system will embroider the repeated design; part repetition is based
on the color, when finish embroidering one color in all the designs, system moves to the next
color.
5.1.6
“X&Y Reps”
X Reps of this parameter sets the number of rows in repetition, and Y Reps of it sets the number
of columns in repetition. The above diagram shows that X Reps is 3 and Y Reps is 2. The
largest set value is 99*99.
5.1.7
“X&Y Interval”
The above diagram also explains the meaning of this parameter.
5.1.8
“Prior Mode”
There are two modes: rotating prior to scaling and scaling prior to rotating. When the user has
selected the “Rotate”, the design will rotate first and then scale up/down with the setting
rotating prior to scaling. Otherwise it will scale up/down first and then rotate.
5-2
Setting of other embroidery parameters
Other parameters include 8 groups: embroidery assistant parameters, thread-breakage detection
parameters, frame parameters, main shaft parameters, thread-trimming parameters, sequin
parameters, special embroidery parameters and machine configuration & maintenance
parameters. For some machines with parameter-protected function, some parameters can be
attached passwords by administrators or embroidery factories. For setting the administrator
passwords and the factory password, as well as initialization of parameters, please press “
”
to enter the “purview of machine parameter manage” screen. (See Chapter 5.4)
BECS-D56 computerized embroidery machine owner’s manual
57
Summary of Contents for BECS-D56
Page 2: ......
