Beijing Dahao Technology BECS-D56 Page 79 Owner'S Manual Download

Page: 79 / 188

Chapter 6 Assistant Operation

Press the key “

”to resume start point, then then system will move the frame to the

start position that already saved before; press “

”to cancel the operation.

6.1.2

Save design start

Move the frame to the embroidery design origin.

Follow the above instruction and enter assistant embroidery operation screen.

Move the cursor to “Save design start” and press “

” to activate the following window:

Press the key “

”to save the current frame position as the origin. Press the key

“

”to cancel the operation.

6.1.3

Auto to start position

This function is used for locating design center to the frame software center set by

the system (see 6.2.5) so that you can embroider the design to the center of the

frame.

Follow the above instruction and enter assistant embroidery operation screen.

Move the cursor to “Auto to start position” and press “

”.

BECS-D56 computerized embroidery machine owner’s manual

Summary of Contents for BECS-D56





























































































































































































Search results

Summary of Contents for BECS-D56

Reviews:

Related manuals for BECS-D56

Brands by name

Popular brands

Beijing Dahao Technology BECS-D56, Owner'S Manual

Search results

Summary of Contents for BECS-D56

Reviews:

Related manuals for BECS-D56

Brands by name

Popular brands