Beijing Dahao Technology BECS-D56, Owner'S Manual, Page: 43 / 188

Chapter 4 Memory Design Management
4-2 Select One or Several Designs
Before any operation on designs, you must select the target designs. You can
select one design at each time or select several targets in one time to raise
efficiency.
1. Press “
"
to select the targets.
By default, the first design in the page is the selected one. Press “ ”key or
the design number key to select design. The icon and words of the selected target appears in the
red squares.
At the selection, if the system is in multi-selection status, user can select several objects.
2. Select the items one by one
In multi-selection mode, user can press “ ” or the design number key to
move icon to the target item and press “ ”to select it. Repeat the process to select more. Or
you can press “ ” on the selected design to cancel the selection.
4-3 Selecting a Design for Embroidery
1. Select a new design (Ensure that the system is in preparation status .)
2. Press
“
”
in the main screen to enter the memory design management
screen.
3. Select the design in the memory design image area of the memory design
management screen.
4. Press to enter the screen for setting the memory design parameters.
There are 30 parameters relating to the design, some of them can only be modified after the
administrator password is released. The setting method of it is same as other parameter setting
procedure. Please refer to 5.2 for details.
5. After changing the design parameter, press “ ”to quit. User can use the
selected design for embroidery. If the operation is completed, the system will
close the memory design screen to return to the main screen.
BECS-D56 computerized embroidery machine owner’s manual 37