BeamMed Sunlight Omnisense 7000S, User Manual

Page: 106 / 284

5-12
User Guide
CHAPTER 5
Working with Omnisense
5.2 Changing Users and Shutdown
When shutting down Omnisense, do not simply turn off
the power switch. This could cause permanent loss of
data. Follow the prescribed shutdown procedure.
It is entirely acceptable to leave the Omnisense unit on for long
periods of time. However, after installing a peripheral device
such as a printer or running a utility such as System Upgrade,
you will often be required to restart the system, a procedure also
known as “Reboot.” You may also want to turn off Omnisense
for reasons of energy conservation.
The procedure described below is also used when you want to
reenter the system with a different user ID. This is useful if, for
example, you are transferring responsibility for SOS measure-
ments to an assistant and wish to limit that person’s access to
sensitive patient data. In all of the above situations, follow the
procedure below.
Shutdown Procedure
S
TEP
1 Terminate the current measurement
If an SOS measurement is currently in progress,
complete the measurement or abort it by clicking on
the
Abort
button. After a measurement has com-
pleted, save or abort the results data.
S
TEP
2 Close the current patient file
Any currently open patient file must be closed
before you can exit Omnisense.