manualshive.com logo in svg

baxter 2L3107, Operator'S Manual, Page: 53 / 194

Share
Download
baxter 2L3107 Operator'S Manual Download Page 53

Ipump Pain Management System Operator’s Manual

3-13

CD07-19-E4-766

Preparing, Loading, and Changing the Tubing Set and Fluid Bag 

During the preparation of the fluid bag and tubing set, you must use aseptic technique, follow hospital 
guidelines for changing bag sets, and follow the directions for the fluid bag provided by the manufacturer. 
The pump may be used with several types of fluid bags, including:

Q

Baxter 100 mL or 250 mL bags, or 

Q

Viaflex or IntraVia containers, or similar fluid bags up to 500 mL 

The following directions are provided to assist you in using the different types of bags in the pump. These 
directions cover:

Q

Loading the Tubing Set

Q

Filling and Loading the Fluid Bag

Q

Changing the Tubing Set and/or Fluid Bag

! WARNING !

This pump should be used only with the Baxter accessories specified for it. There are risks 
associated with using anything other than the recommended accessories with this pump. 
Accessories designated for use with this pump are listed in “Accessories, Disposables, and 
Recommended Sets,” 8-1.

Oct02_0719E4766.book  Page 13  Friday, August 3, 2007  1:46 PM

Summary of Contents for 2L3107



































































































































































































Reviews:

No comments