Home
/
baxter
/
2L3107
/
Operator'S Manual

baxter 2L3107, Operator'S Manual, Page: 145 / 194

Share

Page: 145 / 194

baxter 2L3107 Operator'S Manual Download Page 145

Ipump Pain Management System Operator’s Manual

7-5

CD07-19-E4-766

Transporting and Storing the Pump

When unpacked, store the pump without the battery in a clean and dry environment to safeguard against
prolonged exposure to dust and moisture. This storage area should meet the following environmental
guidelines:

Q

Temperature range: -20ºC to 60ºC (-4ºF to 140ºF)

Q

Relative humidity: 10% to 95% (non-condensing)

If conditions fall outside these limits, Baxter recommends that the device be repackaged in the original
shipping materials.

Note:

When storing the pump, remove the 9-volt battery from the pump. Always store the pump with the tubing door closed.

Functional Testing

Perform as required, but recommended every 6 months.

Check

Action

Entire device

Schedule functional test by qualified biomedical personnel or authorized service personnel as specified in the
Ipump Pain Management System Service Manual.

Oct02_0719E4766.book Page 5 Friday, August 3, 2007 1:46 PM

«
...
143
144
145
146
147
...
»

Summary of Contents for 2L3107



































































































































































































Reviews:

No comments