Baume And Mercier Capeland 65687, Instruction Manual

Page: 10 / 226

6|
Crown in Position 1: turn crown clockwise. The watch is
fully wound when the crown can no longer be turned.
The power reserve of a mechanical watch varies, depending
on the model, between approximately 40 and 90 hours
5
.
We recommend you wind it once a day if it has a power
reserve less than 48 hours.
Self-winding mechanical watch
A watch equipped with an automatic winding mechanism
automatically winds itself throughout the day as you move
your wrist.
Because of this, the watchband must be correctly fitted to
the wearer’s wrist. If the watchband is too loose, the watch
may not wind itself correctly. For optimal winding, wear your
watch daily.
If you have not worn your watch for more than 40 hours,
you must wind it manually by turning the crown in Position
1, clockwise, between 20 and 30 turns.
After wearing your watch for several hours, depending on
your activity level, the watch will be perfectly wound.
Once completely wound, your watch has a power reserve of:
§
Approx. 40 hours
2 4 6 8 9 10 11 13 14 15 16 17
20 26
§
Approx. 48 hours
19 21 22 23 24 25
§
Approx. 65 hours
18
POWER RESERVE
9 10 13 14
For models with a power reserve indicator, the hand (L)
indicates, on a scale which may vary per model, the amount
of time remaining until the watch must be wound again.
When the watch is entirely wound, the indicator sits at its
maximum position.
SETTING THE TIME WITHOUT A CALENDAR
FUNCTION
2 5 9
1. Set the crown in Position 2.
2. Turn it either clockwise or counter-clockwise until the
watch hands (A, B) are positioned at the desired time.
3. Reset the crown Position 1.
SETTING THE TIME WITH A CALENDAR
FUNCTION
4 6 8 10 11 13 18 19 20 21 22 23 24
25 26
1. Pull the crown to the maximum position (Position 2 or
3 depending on the model). If your watch comes with a
seconds hand (C) it will stop moving.
2. Turn the crown either clockwise or counter-clockwise,
depending on the model, until the hands are positioned
at the desired time.
Note :
When the hands pass the numeral 12, if the date
changes, it means it is midnight and if the date does not
change it means it is noon.
3. When the start of the set time is announced (reference
clock, radio, etc.), Reset the crown to Position 1.
001-224_COR2.indd 6 06.01.15 10:46