Basler BE1-11m, Instruction Manual

Page: 543 / 610

9424200996 83-19
BE1-11 m RTD Module
Standards
IEC 60068-1:
Environmental Testing Part 1: General and Guidance. Temperature Test
IEC 60068-2-1: Basic Environmental Testing Procedures, Part 2: Tests - Test Ad: Cold (Type Test)
IEC 60068-2-2: Basic Environmental Testing Procedures, Part 2: Tests - Test Bd: Dry Heat (Type Test)
IEC 60068-2-28:
Environmental Testing Part 2: Testing-Guidance for Damp Heat Tests
IEC 60255-4:
Single Input Energizing Quantity Measuring Relays with Dependent Specified Time
IEC 60255-5:
Electrical Insulation Tests for Electrical Relays. Dielectric Test and Impulse Test
IEC 60255-6: Electrical Relays - Measuring Relays and Protection Equipment
IEC 60255-21-1:
Vibration, Shock, Bump, and Seismic Tests on Measuring Relays and Protective
Equipment (Section 1 - Vibration Test - Sinusoidal). Class 1
IEC 60255-21-2:
Vibration, Shock, Bump, and Seismic Tests on Measuring Relays and Protective
Equipment (Section 2 - Shock and Bump Test - Sinusoidal). Class 1
IEEE C37.90.1:
Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated
with Electric Power Apparatus
IEEE C37.90.2:
Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from
Transceivers
UL Approval
“cURus” recognized to UL Standard 508 & CSA Standard C22.2 No.14
CSA Certification
CSA certified to Standard C22.2 No.14.
EU Compliance
This product has been evaluated and complies with the requirements set forth by the EU legislation.
• LVD 2014/35/EU
•
EMC 2014/30/EU
•
RoHS2 2011/65/EU
Harmonized Standards used for evaluation:
• EN 50178:1997 - Electronic Equipment for use in Power Installations
• EN 61000-6-4:2001 - Electromagnetic Compatibility (EMC), Generic Standards, Emission
Standard for Industrial Environments
•
EN 61000-6-2:2001 -
Electromagnetic Compatibility (EMC), Generic Standards, Immunity for
Industrial Environments
• EN 61000-4-2:
Electrostatic Discharge Immunity
•
EN 61000-4-3:
Radiated, Radio-Frequency, Electromagnetic Field Immunity
•
EN 61000-4-4:
EFT Immunity
• EN 61000-4-5: Surge Immunity
•
EN 61000-4-6:
Conducted Immunity
•
EN 61000-4-8:
Power Frequency Magnetic Field Immunity
• EN 61000-4-11: Voltage Dips and Interrupts
HALT (Highly Accelerated Life Testing)
Basler Electric uses HALT to prove that our products will provide the user with many years of reliable
service. HALT subjects the device to extremes in temperature, shock, and vibration to simulate years of
operation, but in a much shorter period span. HALT allows Basler Electric to evaluate all possible design
elements that will add to the life of this device. As an example of some of the extreme testing conditions,