Basler BE1-11m, Instruction Manual

Page: 25 / 610

9424200996 2-3
BE1-11 m Quick Start
Figure 2-1. Front Panel Label Example
Connect rear terminals A6, A7, and A8 (ground) to a power supply. Figure 2-2 shows the rear terminals of
the BE1-11 m with standard I/O option. Apply operating power consistent with the nominal power supply
values listed on the front-panel label. Wait until the boot sequence is complete.
Figure 2-2. PWR Rear Terminals
Start BESTCOMS Plus
®
and Activate BE1-11 Plugin
To start BESTCOMS Plus , click the Start button, point to Programs, Basler Electric, and then click the
BESTCOMS
Plus
icon. During initial startup, the BESTCOMS
Plus
Select Language screen is displayed
(Figure 2-3). You can choose to have this screen displayed each time BESTCOMS Plus is started, or you
can select a preferred language and this screen will be bypassed in the future. Click OK to continue. This
screen can be accessed later by selecting Tools and Select Language from the menu bar.
ETHERNET
!
WARNING
BE1-11
C12 C11 C10 C9 C8 C7 C6 C5 C4 C3 C2 C1 C13 C14 C15 C16 C17 C18
V
A
OUT 2 OUT 3 OUT 4 OUT 5 OUT 1 ALARM V
B
V
C
V
X
V
X
N
E12 E11 E10 E9 E8 E7 E6 E5 E4 E3 E2 E1
OUT 8 OUT 7
IN5 IN6 IN7
OUT 6
A8 A7 A6 A5 A4 A3 A2 A1
IRIG PWR
C A B
COM2 RS-485
GND
B8 B7 B6 B5 B4 B3 B2 B1
IN1 IN2 IN3 IN4
D1 D3 D5 D7
IA1 IB1 IC1 IG1
IA1
D2 D4 D6 D8
IB1 IC1 IG1
IA2
F2 F4 F6 F8
IB2 IC2 IG2
F1 F3 F5 F7
IA2 IB1 IC2 IG2
P0061-43