Barco XPR-600, User Manual

Page: 49 / 297

Once the Restore has reached this point (Applying the main volume),
the Barco Media Server automatically restarts.
9. Allow a few minutes for the Barco Media Server to reconfigure.
Figure 2.16. Completion screen
After the restoration is complete, you may remove the USB System Restore thumb drive.
2.9.2 Full System Restore
The procedure for a Full System Restore is nearly the same as the procedure for a System
Restore. This not only restores the application, software licenses, and settings on the
C: drive, but it erases any data on the D: drive, restoring the system to its original con-
dition.
1. Plug the USB Recovery drive into one of the USB 3.0 ports on the Barco
Media Server.
The Barco USB Recovery drive is a USB 3.0 device; you may reduce
recovery time by using this drive in a USB 3.0 port.
2.
Right-click the Windows icon at the lower left-hand corner of the
screen to restart.
As the system restarts, it displays the Barco logo screen.
3. Press and hold the F8 key to summon the Select Boot Device screen.
4. Select the USB Recovery drive (STT ST3U16SSPS (15000MB)).
Barco Pn: 60600325 46
Section 2: Installation Barco Media Server XPR-Series User Guide