Barco XPR-600, User Manual

Page: 236 / 297

Appendix B: Replacing a power-cord cap
The Barco Media Server ships with an IEC power cord. Different locations (even within
the same country) may require a different power cord cap to connect the server to a
power outlet. Because of the variety of power cord caps used worldwide, Barco cannot
make specific recommendations for the power cord cap. Contact a local authority for
the type of power cord cap needed. When installing the power cord cap, note that the
cores in the mains lead are colored according to the following code:
• green and yellow = earth
• blue = neutral
• brown = live
B.1 Installing a Line Cord Cap – U.K. Only
In the United Kingdom, core colours in the mains lead of this equipment may not cor-
respond with the coloured markings identifying the terminals in the fixture’s plug. In
that case, install a line cord cap according to the following code:
• Connect the green and yellow core to the plug terminal marked with
the letter “E,” or by the earth symbol or coloured green, or green and
yellow.
• Connect the blue core to the terminal marked with the letter “N” or
coloured black.
• Connect the brown core to the terminal marked with the letter “L” or
coloured red.
Warning
Class 1 equipment – This equipment must be earthed.
B.2 Vatic Fitter Heads Information – Danmark
Advarsel: Beskyttelse mod elektrisk chock.
Vigtigt!
Lederne med gul/groen isolation maa kun tilsluttes en klemme maerket eller .
233 Barco Pn: 60600325
Barco Media Server XPR-Series User Guide