Barco XPR-600, User Manual

Page: 34 / 297

Accessories included Product contains
XPR-600/2/4-Series
4RU rack-mount chassis
• Barco Media Server assembly
• USB System Restore drive
1
• USB keyboard
• USB mouse
• US Power Cord NEMA 5/15 (not included
with units shipped to China)
2
• European Power Cord CEE 7/7 (not in-
cluded with units shipped to China)
2
• 7× active DisplayPort-to-DVI adapters
• Rack-mount accessories
• Chassis rack-mount
brackets (x2)
• 10-32 screws (x12)
• Rear support brackets (x2)
• Safety guide
Table 2.1. Box content
Notes:
1. The USB System Restore drive contains the user guide and the recovery
software. To restore the system using the USB System Restore drive,
see the
Restore
section of the
Barco Media Server XPR-Series User Guide
.
2. Barco does not provide power cords for all locations. It may be neces-
sary to install a power-cord cap for your location. See the
Replacing a
power-cord cap section of the Barco Media Server XPR-Series User Guide .
Note
Although the Barco Media Server ships with only active DisplayPort-to-DVI
adapters, the video output card can handle two DisplayPort-to-DVI conver-
sions on its own; for these conversions you
may use passive DisplayPort-to-
DVI adapters. If you wish to connect to more than two DVI devices to the
video output card, you
must use active Display-Port-to-DVI adapters for the
any conversions beyond the first two. Connect passive adapters to ports 1
and 2, and connect active adapters to ports 3 and 4.
You may also use a passive DisplayPort-to-DVI adapter for the desktop display
(primary video card) conversion.
2.3 Rack-mount procedure
The Barco Media Server chassis is designed to be rack mounted. Please note the following
important points:
• The Barco Media Server is 4RU in height.
31 Barco Pn: 60600325
Barco Media Server XPR-Series User Guide Section 2: Installation