Barco XPR-600, User Manual

Page: 125 / 297

4. Launch the Master Player.
Figure 5.50. SMPTE signal strength gauge
In the Outputs layout you should see the SMPTE signal strength gauge
moving. If you don't see anything, it means that either the signal is too
dim or the chosen audio device has to be changed.
Note
You must launch the Master Player to see any effect. If the
Master Player is not running, the Timeline does not react to
the SMPTE signal. Running only the designer does not cause
the signal quality gauge to react to the SMPTE signal, even
if the Master Player is set to run on the same machine.
MTC configuration
Perform MTC configuration in the Outputs workflow layout.
1. Select the Master Player, which should be the Player with a tab labeled
"Master," from the Output control.
2. Choose the correct input device in the MIDI devices section of the
Player’s Properties pane.
Barco Pn: 60600325 122
Section 5: Workflow layouts Barco Media Server XPR-Series User Guide