Barco XPR-600, User Manual

Page: 135 / 297

6.2.2 Projection Study Wizard interface
Figure 6.3. Projection Study Wizard interface
Projector surface
Use these settings to simulate the physical surface that will be projected upon.
Type: This setting, Wall or Floor, defines the orientation of created project-
ors.
Size: Size defines the pixel space (width and height for flat surfaces; radi-
us, height, and angle for curved surfaces) in m, cm, mm, ft, or inches.
Luminance: Luminance of the projection surface.
This parameter should generally remain the default setting of 130
lux, unless projection is to take place in a bright environment, such
as outdoors during the day.
Surface Gain: Surface gain is the extent to which the surface on which you are
projecting absorbs or reflects light. Values fall between 0.0 (100%
absorption) and 1.0 (100% reflection).
Pixel size:
Pixel size defines the physical width of a projected pixel in milli-
meters.
Barco Pn: 60600325 132
Section 6: Tools Barco Media Server XPR-Series User Guide