Barco CORONIS 1MP, Installation & User Manual

Page: 74 / 167

Single Source Master Barco Display Tab
75
Properties
You may access the Properties page of the currently selected
display, which is represented by the monitor icon above with the
black frame around it, by either clicking on the
“Properties”
button or double clicking on the icon .
BarcoMFD library
This is the version of the barcomfd library currently used. This
library provides APIs for interacting with the displays.
Barco Display Properties
This screen (figure 38 on page 76) shows properties of the
currently active display.
Name: Displays the model name of the display.
Serial Number: Displays the serial number of the display.
Backlight RunTime: This is time in hours that the backlight has
been on.
Firmware Revisions: This is the runtime firmware that is loaded
in the display. This information may be helpful when there is a
problem.
Internal Temperature: This is the temperature inside the
display. It starts out at about the ambient temperature when the
display backlight is first turned on, then rises slowly to a steady-
state temperature as the display warms up. Changes in light
level due to temperature variations are completely controlled by
the I-Guard sensor on the front of the display.
Current Luminance Value: This is the current luminance value of
the display. It may vary a bit from time to time, for the display
continuously calibrates itself to meet the target luminance value.