![background image](http://html1.mh-extra.com/html/barco/coronis-1mp/coronis-1mp_installation-and-user-manual_3869470031.webp)
Installation
32
2. Connect the other end of the DVI cable to the video output of
your DVI signal source.
3. Route the cable so that it enters the connector compartment
at the place where the cover is bulged.
To connect analog video & sync cables on BNC:
Connect the video & sync output of the signal source to the video
and sync inputs (9), (8) and (7) of the display.
The inputs accept the following signals:
•
Video with separate horizontal and vertical sync.
• The connection consists of 3 cables.
• Connect the video cable to the connector Video (9).
• Connect the horizontal sync cable to the connector HS/CS
(8).
• Connect the vertical sync cable to the connector VS (7).
• Make sure the signal connected to the HS/CS connector
does not contain Composite sync.
•
Video with external composite sync.
• The connection consists of 2 cables.
• Connect the video cable to the connector Video (9).
• Connect the composite sync cable to the connector HS/CS
(8).
• Make sure no signal is connected to the VS connector.
•
Video with internal composite sync (sync on video).
• The connection consists of 1 cable.
• Connect the video (with sync) cable to the connector Video
(9).
Summary of Contents for CORONIS 1MP
