![background image](http://html1.mh-extra.com/html/barco/coronis-1mp/coronis-1mp_installation-and-user-manual_3869470052.webp)
Single Source Master Windows 2000 BarcoMed C
ORONIS
software installation
53
Windows 2000 BarcoMed C
ORONIS
software installation
Note:
These instructions apply to both
Windows
®
2000
and
Windows
®
XP
.
Preparation
Prior to installing your C
ORONIS
1MP software the following should
be done.
1. Install the BarcoMed C
ORONIS
display controller(s) in your
system.
2. Connect the C
ORONIS
1MP display panel(s) to the
BarcoMed C
ORONIS
display controller(s) and power supply(s).
3. Decide if you want to install the Barco DPMS Screen Saver
and the Barco I-Switch NioWatch Software in addition to the
driver. (See
“Barco DPMS Screen Saver”
on page 99 and
“Barco I-Switch Software”
on page 63 for descriptions of
these add-on features.)
4. Decide if you are going to install the BarcoMed C
ORONIS
driver
with DualView enabled or disabled) (see Step “7.” on
page 59 for a description of DualView).
5. Decide which Palette Mode you wish to use with the
BarcoMed C
ORONIS
display controller. If you are uncertain, use
the default setting as this setting can be changed later using
the BarcoMed Driver Tab of the Windows Display Properties
control panel.
6. Decide if you want to enable the DirectDraw capabilities of
the BarcoMed C
ORONIS
display controller. If you are uncertain,
use the default setting as this setting can be changed latter
using the BarcoMed Driver Tab of the Windows Display
Properties control panel.
7. Decide if you want to disable the 10-bit grayscale
capabilities of the BarcoMed C
ORONIS
display controller. If you
are uncertain, use the default setting as this setting can be
Summary of Contents for CORONIS 1MP
