Barco CORONIS 1MP, Installation & User Manual

Page: 76 / 167

Single Source Master BarcoMed Driver Tab
77
BarcoMed Driver Tab
Introduction
After the BarcoMed Windows display controller driver is installed,
a new Display Properties tab is available for configuring special
features of the BarcoMed display controller.
Languages supported
The BarcoMed Driver Tab supports the following languages:
English (U.S) (default)
Dutch
German
Korean
Japanese
Simplified Chinese
Traditional Chinese
To change between the languages select the correct region via
the Regional Settings Control Panel in your machine’s Start >
Settings > Control Panel.
Using the BarcoMed Driver Tab
Please note that you must have logged on to Windows using an
account with administrator privileges in order to use the
BarcoMed Tabs of the Windows Display Control Panel to change
any display settings.
1. Open the “Display Properties Control Panel” by right clicking
on the desktop, then select “Properties” .
2. Under Windows NT 4.0, Click on the “BarcoMed Driver” Tab
(see figure 39 on page 78).