![background image](http://html1.mh-extra.com/html/barco/coronis-1mp/coronis-1mp_installation-and-user-manual_3869470134.webp)
Advanced functions
135
Low Pass Filter*
* Not in DVI mode
The display electronics provide 4 different low-pass filters to filter
possible high-frequent distortion from an analog video signal.
Select a different filter in case the image contains high-frequent
noise or distortion. Select the filter that gives the best result.
Readjustment of sample phase is necessary after selection of a
different filter.
Advanced functions in the Settings menu
The Settings menu contains the following advanced functions:
Display function
The display contains a number of factory-defined and user-
defined Display functions (LUTs).
Turn the control wheel to select a display function.
•
Select a DICOM display function for most medical viewing
applications. The DICOM function results in more visible
grayscales in the images.
•
Select a CRT (gamma) display function in case the display is
used to replace a CRT display.
•
LUT 3 and LUT 4 are user-programmable display functions
(dedicated software needed).
Max ALC
Contains two functions to set the maximum point
of the ALC control system:
- Measure Max Ambient Light: Decrease the light
in the room to the maximum possible level you
are likely to work in. Next, execute this function.
- Max Luminance: Adjust this value until the lumi-
nance is at the level you wish to work with when
the ambient light is at the maximum level you
have set in the above function.
Summary of Contents for CORONIS 1MP
