![background image](http://html1.mh-extra.com/html/baby-lock/meridian-2/meridian-2_instruction-and-reference-manual_3383926118.webp)
TROUBLESHOOTING
116
While Operating
The empty bobbin was not set on the pin
properly.
24
While winding the bobbin, the bobbin thread was
wound below the bobbin winder seat.
You have not wound the bobbin thread properly
when you initially wound thread on the bobbin.
Ensure that the bobbin thread was properly set in
the guides.
24
The bobbin thread cannot be pulled up.
Needle is turned, bent or the point is dull.
31
Bobbin is set incorrectly.
27
Machine does not operate
All keys and buttons have been locked by
.
31, 113
Nothing appears in the LCD.
Main power switch is not turned on.
13
The plug of the power cord is not inserted into an
electrical outlet.
14
The LCD screen does not look very clear.
The brightness of the screen is not adjusted.
16
Nothing happens, even if the LCD display is touched
Adjust the screen.
114
The screen has been locked.
• Touch either of the following keys to unlock the
screen.
—
The LCD screen is fogged up.
Condensation has formed on the LCD screen.
• After a while, the cloudiness will disappear.
—
Embroidery unit does not operate.
Embroidery unit is not attached correctly.
33
Embroidery frame was attached before the unit
was initialized.
33
Symptom, Cause/solution
Reference
Pointer of the embroidery foot “W+” with LED pointer
does not indicate the position correctly
With thick elastic fabric, the position will be
misaligned only at raised parts in the fabric.
59
With fabric having a very uneven surface, the
position is not correctly aligned.
• The pointer indication should be used only as a
reference.
—
Symptom, Cause/solution
Reference
Machine does not operate.
“Start/Stop” button was not pressed.
10
There is no pattern selected.
35
Presser foot is not lowered.
10
Needle breaks.
Needle is installed incorrectly.
31
Needle clamp screw is not tightened.
32
Needle is turned or bent.
31
Using improper needle, thread or the fabric
prepared insufficiently for embroidering.
31, 55,
67
Upper thread tension is too tight.
77
Fabric is pulled during embroidering.
—
Spool cap is set incorrectly.
28
There are scratches around the opening in the
presser foot.
*
There are scratches on the bobbin case.
*
Needle is defective.
31
A bobbin designed specifically for this machine is
not used.
24
Upper threading is incorrect.
28
Bobbin is set incorrectly.
27
Presser foot is attached incorrectly.
113
Stabilizer is not attached to fabric being
embroidered.
55
Bobbin thread is incorrectly wound.
24
Upper thread breaks.
Machine is not threaded correctly (used the
wrong spool cap, spool cap is loose, the thread
did not catch the needle bar threader, etc.)
28
Knotted or tangled thread is being used.
—
Upper thread tension is too tight.
77
Symptom, Cause/solution
Reference
Summary of Contents for Meridian 2
