![background image](http://html1.mh-extra.com/html/baby-lock/meridian-2/meridian-2_instruction-and-reference-manual_3383926029.webp)
WINDING/INSTALLING THE BOBBIN
GET
T
ING REA
D
Y
27
1
f
Pass the thread through the thread guide.
1
Thread guide
g
Pass the thread around the pretension disk making sure
that the thread is under the pretension disk.
Pull the thread as far as possible.
1
Pretension disk
2
Thread guide
h
Follow steps
g
through
j
on page 25 through
page 26.
Setting the Bobbin
a
Touch
to lock all keys and buttons and raise the
presser foot.
*
If the message [OK to automatically lower the
presser foot?] appears on the LCD screen, touch
to continue.
b
Slide the bobbin cover latch to the right and remove
the bobbin cover.
c
Insert the bobbin into the bobbin case so that the
thread unwinds to the left.
d
Lightly hold down the bobbin with your right hand,
and then guide the end of the thread around the tab of
the needle plate cover with your left hand.
a
a
b
CAUTION
• Use a bobbin that has been correctly wound
with thread, otherwise the thread tension may
be incorrect and the needle may break,
causing injuries.
• Before inserting or changing the bobbin, be
sure to touch
in the LCD to lock all keys
and buttons. Otherwise injuries may occur if
the “Start/Stop” button or any other button is
pressed and the machine starts embroidering.
1
Tab
Note
• Be sure to hold down the bobbin with your finger
and unwind the bobbin thread correctly, otherwise
the thread may break or the thread tension will be
incorrect.
a
Summary of Contents for Meridian 2
