![background image](http://html1.mh-extra.com/html/baby-lock/meridian-2/meridian-2_instruction-and-reference-manual_3383926033.webp)
CHANGING THE NEEDLE
GET
T
ING REA
D
Y
31
1
Using the Vertical Spool Pin
Use the vertical spool pin when using an irregularly
shaped thread spool, and when embroidering with
metallic thread.
a
Insert the vertical spool pin onto the bobbin winder
shaft.
b
Install the spool felt and the thread spool in that order,
and then thread the upper thread.
Thread and Needle Number
The lower the thread number is, the heavier the thread;
the higher the needle number, the larger the needle.
Embroidery Needles
Use a ball point needle 75/11.
Memo
• If the needle could not be threaded or the thread
was not passed through the needle bar thread
guides, perform the procedure again starting from
step
c
.
Note
• Some needles and threads cannot be threaded
with the needle threader. In this case, instead of
using the needle threader after passing the thread
through the needle bar thread guide (marked “6”),
manually pass the thread through the eye of the
needle from the front.
1
Bobbin winder shaft
2
Vertical spool pin
1
Spool felt
2
Thread spool
Memo
• When setting the thread spool, set it so that the
thread winds off from the front of the spool.
• This method keeps the thread from twisting as it
comes off the spool pin.
b
a
b
a
CHANGING THE NEEDLE
CAUTION
• Always touch
on the screen to lock all
keys and buttons before changing the needle.
If
is not touched and the “Start/Stop”
button or another operation button is pressed
accidentally, the machine will start and injury
may result.
• Use only home sewing machine needles. Other
needles may break and may cause injury.
• Never use a bent needle. This may cause
injury.
Memo
• To check the needle correctly, place the flat side of
the needle on a flat surface. Check the needle from
the top and the sides. Throw away any bent
needles.
1
Parallel space
2
Flat surface (bobbin cover, glass, etc.)
• The machine needles are consumables.
Replace the needle in cases such as those
described below.
- If an unusual sound is produced when the needle
enters the fabric. (The tip of the needle may be
broken or dull.)
- If stitches are skipped. (The needle may be bent.)
a
b
Summary of Contents for Meridian 2
