![background image](http://html1.mh-extra.com/html/baby-lock/meridian-2/meridian-2_instruction-and-reference-manual_3383926100.webp)
STITCH SETTINGS SCREEN
98
Fill stitch settings
Stippling stitch settings
Decorative fill stitch settings
a
Use
to select the line or region to be changed.
Each touch of
moves the highlighting of the
selected pattern in order.
b
Select the setting to be changed, and then change the
setting in the screen that appears. (In this example, the
embroidering direction will be changed.)
The setting screen appears.
c
Touch
, and then use
to change the
direction.
d
Touch
to apply the setting.
*
appears on the tab for settings that were
changed.
*
Change other settings in the same way.
Specifying Global Stitch Settings
The same stitch settings can be changed at the same time for
multiple patterns of the same type.
a
Use
to select the stitch whose settings are to
be changed, and then touch
.
The same stitch type lines or regions will be selected
at the same time.
b
Follow steps
b
through
d
in “Specifying Individual
Stitch Settings” on page 97 to change the settings.
c
Touch
to create the embroidery pattern.
[Direction]
Specifies the embroidering direction. Select
to change to the desired direction of
fill stitch.
[Density]
Specifies the stitch density of fill stitch.
[Pull
compensation]
Specifies to correct the shrinkage of the
pattern by slightly shortening or lengthening
the stitching. Change the setting after you
test embroider the pattern and can check the
shrinkage.
[Under
sewing]
Select if you need or do not need the under
sewing for the stabilized fabric.
[Run Pitch]
Specifies the length of a stitch of the
stippling stitch.
[Spacing]
Specifies the spacing between the stitches
when embroidering the stippling stitch.
[Distance]
Specifies the offset from the pattern outline.
[Size]
Increases/reduces the size of the pattern.
[Direction]
Specifies the rotation angle of the pattern.
[Outline]
Select whether [ON] or [OFF] the outline is
also converted to embroidery data. If [ON] is
selected, the number of thread jumps can be
reduced.
Summary of Contents for Meridian 2
