- 25 -
Vocal messages
CAPTURE has the possibility of forwarding specific vocal messages depending on the arisen events.
These messages can be technical or alarm and/or to reset the inputs.
Technical messages
relate to situations like power supply anomalies, the absence of the telephone line or other, and are composed automatically
using the vocabulary of pre-recorded words shown in the
Telephone Table
; normally associated and placed before these messages, is the welco-
ming message where the installer usually records the address of the establishment where CAPTURE is installed and, if the sectors are enabled,
the message relating to the event belonging sector.
These messages (Welcoming and Sector Message) can be enabled or not to transmission for every individual profile of telephone numbers.
Zones automatic communications
Alarm/zones reset messages
relate to the opening or closing of the inputs.
The opening/closing communications of the inputs are normally automatically composed by CAPTURE in relation to the type of line set during SIA
coding (ex. theft line or gas line etc.), to the zone number (1-32); normally associated and placed before this communication, is the welcoming
messages and, if the sectors are enabled, the message relating to the event belonging sector.
These messages (Welcoming and Sector Message) can be enabled or not to transmission for every individual telephone number.
Zones customised communications
Should it be necessary to customise the CAPTURE communications relating to the zones, by creating an additional message to the standard one,
it is possible to access the pre-recorded vocabulary and enter the code of the word in the “Vocal word 1-2-3- 4” steps, as shown in the “
Telephone
Table
” inside the telephone menu.
Zone par.
ENT
Vocal word 1
0 (max. 415)
Vocal word 2
0 (max. 415)
Vocal word 3
0 (max. 415)
Vocal word 4
0 (max. 415)
Iss. All / Rest.
YES
Iss. zone coding
YES
Iss. telephone zone
YES
Iss. zone num.
YES
For every individual input it is possible to customise the communication by imposing the control panel to “automatically” communicate or not the
words and have another 4 extra telephones available (“Vocal word 1-2-3-4”).
Welcoming message communication
The welcoming message is part of the 40 customisable by the installer and can be composed by:
1- Recorded welcoming message (usually the ES system reference: at the offices of AVS Electronics S.p.A. in via Valsugana n. etc.)
2- Enabling or not of the sector reference (should the system be divided into more sectors, it would also be useful, in the vocal communication, to
have the sector reference in the communication).
3- Additional optional message (should the system be divided per sectors, it would also be useful, in the vocal communication, to have the sector
detail in the communication)
A message could be composed as follows:
“
1
” at the office of AVS Electronics S.p.A. in via Valsugana n. .. etc” - “
2
” sector 3” - “
3
” production “ - “ etc. etc.”
The enabling of the communication message happens using the programming step “account code/messages” from the telephone menu.
Under “Phone number > Associate Sector > Sector #”, introducing a value different from zero (0) in the “WORD” programming menu, it is possible
to activate the vocal announcement of the plant introducing message.
Presentation word :
Introducing a value different from zero (0) will communicate the associated word (see word table).
Sector word :
Introducing a value different from zero (0) will communicate the associated word (see word table), linked to the
associated sector.
Announcement of the SECTOR number:
Choosing “YES” will communicate “sector number” words.
Example :
· The introducing message recorded in the memory place n° 376, which corresponds to the 1 st recorded message,
is enable.
· The additional word n° 117 (garage) is enable
· The “sector number” word is enable
Presentaz. word
0 (0 .. 415)
Word sector
0 (0 .. 415)
Emis. num. sect.
NO
Presentaz. word
376 (0 .. 415)
Word sector
117 (0 .. 415)
Emis. num. sect.
YES
